menu

Edge Grinding Tuning Machines

MONTANA - THE WORLD OF EXCELLENCE

IndiaSkis is bringing the world of excellence in Ski & Snowboard service machines from Montana – Switzerland for India.

MONTANA has been a pioneer in ski and snowboard service. MONTANA machines are built with more than 30 years of experience. The first stone grinder was produced by MONTANA 28 years ago. MONTANA machines are well built and very solid. MONTANA machines are a real value investment. The resale value is very high. The MONTANA service technicians make sure that the machines are always working with top performance. From MONTANA you get the most for your money – more technology and friendly customer service. MONTANA is affordable for all shops – small, medium and large, it is always an economical choice. MONTANA service technology produces extremely smooth and consistent base and edge finishes, a high capacity per hour and as a result a fully prepared ready to use ski or board.

Dealers

Contact Us

 
Edge Ginding, Tuning Machine

DSG: Side edge grinding

The compact, double side edge grinder for skis with the same technology  that is used on the grinding robots: full ceramic sliding blocks with ceramic belts. Different edge angles can be produced. The side edge sharpening machine comes with an auto-feed that allows double sided edge grinding in one process. With grinding simple, fast and precise.

  • Automatic centering system
  • For all skis, including telemark, carving and wide skis up to 145 mm
  • Easy angle adjustment with plate of 87° – 89°

Option

Water drain

Technical data

 Rated power

2.3  kW

 Voltage

3 x 380 V

 Fuse

16 A

 Tank

40 liters

 Total weight

270 kg includind sanding emulsion

CARVER: Automatic edge grinding

High tech machine for edge grinding and base bevelling. The GHTT corresponds to the full ceramic plate grinding system and HTT tuning in the grinding robots. With this system you are precisely sharpening the steel edges sidewasys and you are also tuning and polishing the edges on the base side with high precision and a minimum of material use.

  • Self centering system
  • Pressure system
  • For all skis including Telemark, fat skis and especially Carving skis
  • Easy angle adjustment from 87°–89°
  • Beveling angle of approx. 0.5°
  • Extremely space saving
  • With high precision dressing system

Technical data

 Rated poser

3.5 kW

 Voltage

3 x 400 V / 50 Hz

 Fuse

16 A

 Tank

120 liters

 Air pressure

160 l/min

 Total weight

650 kg

HTT 3-D FINISH: Grind, Tune and Polish Edges

The finish machine for smaller workshops for skis and snowboards for side edge sharpening, edge bevelling and edge polishing. Edge angles are adjustable for side edge grinding and bevelling. This machine functions with the same HTT disks that are used on the grinding robots. Three easy steps produce smoothly bevelled base edges and accurately sharpened and polished side edges.

  • 1 unit with 3 positions
  • Angle adjustment from 85° – 89°
  • Easy side edge sharpening and polishing
  • Precision base edge beveling angle adjustable from 0.5° – 1.5°

Technical data

 Rated power

1.2 kW

 Voltage

3 x 400 V / 50/60 Hz or 3 x 230 V 50/60 Hz

 Fuse

10 A

 Tank

30 liters

 Total weight

160 kg

MCS 2000: Side edge tuning

A compact, easy to use side edge grinder using a ceramic plate with belt which can be used for grinding snowboards or skis. This machine functions with the same technology that is used on the grinding robots. Edge angles are adjustable.

  • Compact size
  • Easy angle adjustment from 87°– 89° degrees
  • Closed coolant circuit
  • Extremely precise with minimum use of material especially important for all snowboards and skis
  • Ceramic grinding plate
  • Grinding support adjustable in height

Technical data

 Rated power

0.8 kW

 Voltage

3 x 400 V / 50 Hz
oder 3 x 220 V 60 Hz

 Fuse

10 A

 Tank

25 liters

 Total weight

82 kg

©2008 IndiaSkis