IndiaSkis is bringing the world of excellence in Ski & Snowboard service machines from Montana – Switzerland for India.
MONTANA has been a pioneer in ski and snowboard service. MONTANA machines are built with more than 30 years of experience. The first stone grinder was produced by MONTANA 28 years ago. MONTANA machines are well built and very solid. MONTANA machines are a real value investment. The resale value is very high. The MONTANA service technicians make sure that the machines are always working with top performance. From MONTANA you get the most for your money – more technology and friendly customer service. MONTANA is affordable for all shops – small, medium and large, it is always an economical choice. MONTANA service technology produces extremely smooth and consistent base and edge finishes, a high capacity per hour and as a result a fully prepared ready to use ski or board.
A universal machine for waxing and polishing of skis and snowboards with a high capacity and a minimum use of material. The machine is space saving and works odorless and environmental friendly.
Heated waxing roll
Polishing roll
For ski and snowboard
Constant thin wax coat
Small space required
Not harmful to the environment
Odorless
Adjustable temperature with thermostat
Wax roll width: 350 mm
Option
Stand on wheels
Technical Data
Rated power
2.8 kW
Voltage
3 x 400 V / 50 Hz or 3 x 220 V 50/60 Hz
Fuse
10 A
Dimensions
Width
530 mm
Height
230 mm
Length
500 mm
Weight
50 kg
Fluid Waxer: Hot Waxing Machine
Waxing
FLUID WAXER
with stand
The ideal liquid hot wax machine for ski and snowboards. The amount of wax is adjustable at variable speed. The wax tub is changeable, so different kinds of wax can be used. A compact and portable solution.
Compact and portable design
Heated wax container
Motor driven wax application drum
Wax application adjustable
Built-in themostat
Adjustable temperature
Wax roll width: 350 mm
Option
Stand on wheels
Technical data
Rated power
1.0 kW
Voltage
1 x 230 V / 50/60 Hz or 1 x 1100 V 60 Hz
Fuse
10 A
Width
230 mm
Higth
175 mm
Length
750 mm
Weight
27.5 kg
WAX FUTURE
High end hot waxing machine for Top Quality Service and Racing
The latest race proven waxing technology with the highest requirements for far better gliding and protection properties. Any wax on the market can be applied to the bases by hand or with a wax machine such as MONTANA FLUID WAXER or WAXMASTER. Without any direct ski contact or temperature shock the WAX FUTURE glides at variable speed over the base and allows the wax to penetrate deep into the polyethylene base. The application is independant of the outside temperature (no condensation as normal when using the iron). Wax saving compared with conventional wax methods is up to 90%. Based on an optimized wax application you will get a higher wax penetration and absorption which results in long lasting gliding capacity of the ski and snowboard bases especially with hard waxes. The even distribution of the temperature over the whole ski leads to a homogeneous wax penetration.
Any wax can be applied
The application is independent of the outside temperatures (no condensation)
Higher wax penetration and absorption
Wax saving up to 90%
Highly improved gliding capacity that lasts much longer
New: different programs that allow an automatic treatment of skis or snowboards
Reduction of the working hours of your service staff